These are some monsters that I based for Frostgrave recently. Various makes of figure and some that I painted over 20 years ago, well except for the Wolfman he was painted recently. From top to bottom are the Wraith, Vampire, Mummy, Wolfman, Ghost and Ghoul. The Wraith, Vampire and Ghost are froma range of figures sold by Tabletop Games in the 80's, The Mummy is a plastic Hero Quest figure, I haven't a clue about the Wolfman other that to say it had Super Villain stamped on the top of its base and the Ghoul is from Games Workshop.
These are some animals that I recently painted for my Frostgrave games being from top to bottom: A Snow Lion (I haven't got a Snow Leopard), A Frost Bear, A Giant Boar and A Snow Ape. I haven't a clue what make they are as I have had them years and they were second hand when I bought them, all I do know is that they are all white metal and actually rather nice pieces. If I had to guess as to the make of figures (and it would be a complete guess) I would say that the Lion, Bear and Boar were from Irregular Miniatures and the Snow Ape from Ral Partha, if anyone knows better then please let me know.
This is my warband for Frostgrave all finally finished. The last two figures are painted and based being the Wizard and her Apprentice, both Sigilists and ready to join the rest of the warband. The Wizard and Apprentice are both of course Frostgrave miniatures (a gift from my best mate Nick, cheers mate!) and the rest of the crew are a group of misfits from different manufactures spanning some 35 years or so. The Archers are both converted from Essex Miniatures medieval spearmen, onepainted years ago and one with arms donated from the plastic Frostgrave soldiers set. The Thief and Treasure Hunter are both old Citadel Miniatures from the late 70's early 80's. The first set of Thugs are figures from Essex Miniatures and an unknown make that I painted years ago. The second set of Thugs are from Essex Miniatures and Mirliton, both with plastic arms and weapons from the Frostgrave soldier set. Believe it or not these figures are actually finished with matt varnish, although under the flash they seem quite shiny.
This beauty cost me £1.67 as it came as a set of 3 different ready painted dragons for £5.00 from The Works. All I had to do was base it and it was ready to go, I did think about giving it a wash of colour, but decided not to as it looked good enough as it was. Remember, cheap toy shops are a fantasy gamers friends as they have all sorts of useful figures and creatures you can use. The piles of glittery jewels and coins are glittter, and the snow is from Woodland Scenics.
As for gaming stats I will use the same stats as for a Major Demon with the ability to freeze an opponent with an Icy Breath Attack, this will be a +5 shooting attack against any figure within 12 inches and will also freeze the target if successful, which means the target may take no actions in its next activation.
For a few weeks I have been mulling over what to do with regards to making a playing surface that is specific to Frostgrave. What I wanted was something that looked good, quick & easy to construct, light & portable, inexpensive, quick to set up and easy to store away. I experimented with tiles but was less than happy as the weight was an issue, they were either too light or too heavy and they were too flat with little scope for diferent height levels in the game. I thought about a roll up mat, but the idea of making a stone effect matt was daunting and choice of material was a tough as I couldn't find anything that seemed appropriate for my needs. Anyway both options were looking expensive the more I thought about it and neither were quick & easy to construct especially for the effect I wanted. I decided to have a total rethink and searched the internet for ideas, I found loads of nice looking terrain but most looked like it took an age to build, so was not what I wanted. I eventually found soem ideas on You Tube and especially liked the ideas related to dungeon crawling tiles from TheDMGinfo, his tiles ticked a lot of my boxes for what I wanted being cheap, easy to make, visually good and easy to store away. However I had already bought some stone effect paper PDF's from Wargames Vault and decided that it would be much quicker to use that as a surface than to paint them. As I needed lots of free corrugated card I decide to visit my local Aldi & Lidl as you can get loads from both of these places in the form of fruit & vegetable boxes, and they are also very useful for transporting your shopping from the store to your home. So, one shopping trip later I arrived home with a boot full of boxes and laid them out in front of me and that is where an idea came to me which would fulfill all of my wishes for a Frostgrave table. Why not use the underside of the boxes as they were for the table surface. They were strong, not too heavy or too light, not far from the ideal size being 16 inches by 12 inches, easy to make into a playing surface, easy to make different height levels and would also serve the purpose of storing & transporting the terrain from place to place. With the problem solved, in my head at least, I decided to throw the idea at my best buddy Nick to see what he made of it and he loved the idea. So, we planned to make a day of it and build the basic layout with six boxes, and here is how it went.
7 fruit or vegetable boxes, each 16 inch by 12 inch.
Cereal packet card or similar.
White glue (PVA).
30 A4 sheets of borderless printed stone effect paper.
Bowl for the glue.
Brushes fo the glue.
Construction Method Steps 1 - 3
1. Assemble together the 6 boxes for the table top and cut off the locator tabs as per photo's 1 & 2.
2. Cut out 24 approximately 3 inch right angled triangles for covering the locator holes in the bottom of the boxes as per photo's 3 & 4
3. Glue the triangles over the holes with white glue as per photo's 5 & 6
Construction Method Steps 4 - 6
4. Gather together 15 of your printed stone effect paper sheets and cut each sheet lengthways in half as per photo's 7 & 8 so that you have 30 lengths of paper.
5. Paste a length of paper with white glue and start to wrap around the box allowing approximately 1 inch overlap for the top of the box as per photo 9.
6. Continue this procedure all around until the box is totally wrapped as per photo 10. A total of 5 lengths are needed to completely wrap each box. Continue this until all the boxes are wrapped.
Constructions Method 7 - 9
7. Take 12 of the sheets of stone effect paer and start by pasting the half of the top of the box with white glue and then paste down one sheet of paper as per photo 11.
8. Take another sheet of paper and paste this down to the box top ensuring the paper matches up to the previous sheet as per phot 12.
9. Continue until all the box tops are complete and then lay out the boxes as they would be to make a table top as per photo's 13 & 14.
Construction Method 10 - 13
10. Take 2 sheets of the stone effect paper and paste down to thin card with white glue as per photo 15.
11. Cut 1 sheet lengthways into strips each about 1 inch or so wide and the other sheet cut sideways into the same 1 inch or so strips as in photo 16. You will need at least 3 long strips and 8 short strips.
12. Take your 7th box and cut out strips each approximately 10 inches long by 1 inch deep from the bottom of the box. You will need at least 7 of these strips as per photo 17.
13. Cut 4 of the corrugated strips in half to make 8 small strips and using a glue gun attach the corrugated strip onto the underside of the 8 short card strips along the centre line and continue with the 3 longer strips as per photo18.
Construction Method 14 - 15
14. Place all the jointing strip into the table top as per photo 19.
15. Randomly place Terrain and admire your handywork as per photo 20.
So there you have it, all finished and ready to use for a game. We were both extremely impressed with the end result especially as it was so quick to put together and inexpensive to make. All in all it took around 3 to 4 hours for us both to make from start to finish, but having said that we do tend to waffle on at times so some time could be saved there if only one person did the project. So, 6 - 8 man hours were used in making this, which is pretty good really and it was extremely easy to make. As for cost this breaks down as follows: Boxes and card all free = 0 pence, White glue, one third of a £1.00 bottle = 33 pence, Glue sticks, 2 at 10 pence each = 20 pence, 30 sheets of stone effect paper, printed on good quality 100 gsm paper with good quality ink = 45 pence, so a total price of 98 pence in total. I am going to varnish my boxes and jointing strips with matt acrlic varnish which will effectively double the price, and although not really necessary it will add extra strength, durability and water resistance to the playing surface.
In the coming weeks we intend to make some steps & jointing strips for use with higher levels, which is why the boxes have stone work around their sides. Some more building & ruins covering all the scenarios in the book and someextra pieces that we feel compelled to make. We also want to make an open sewer or river that runs across the centre long edge of the table at a lower level to the rest of the table top, which will add depth to the terrain and make the table top at least 36 inch square. More of all this in later posts though, for now I want to play test the table top so that I can draw conclusions from it and perhaps even think of ways to improve it.
This little chap cost me all of £1 from a pound shop and when compared to the size of a 28mm figure he certainly looks the part. My son gave him a once over with paint, but really as he was ready painted we could have used him as supplied without too much fuss. I decided to base him and added some bushes, snow and frost to set the mood. All in all well worth every penny, and as there were a set of four different equally impressive creatures/monsters I bought the whole set. Pound shops and toy stores are very good places to look for all sorts of fantasy and sc-fi bits and pieces if you aren't stuck to the idea of buying branded items.
These are some pics of an Attack Bike with modifications to make it more Space Wolf-like, some Blood Claws and some Grey Hunters that I finished recently.
This is a model of a Space Marine Landspeeder I recently finished converted to the Space Wolves chapter with some spares bits and pieces from the Space Wolves infantry box set. Building and converting it was simple enough and so too was the painting, although the crew upper bodies had to to painted separately and attached later. Deciding upon the base treatment was the fun part, I wanted the Landspeeder to look like it was skimming over a rocky outcrop and the rocks, which are real, also helped make the model balance better with their extra weight.
These are some Republican Romans I was commissioned to paint earlier this year. The make of figure is Newline Designs and although I wasn't overly struck by them at first I have to admit that they painted up really well.
Here are some pics of some simple easy to make ruins for Frostgrave. I made these a couple of days ago and since made loads more in different configurations. They are made from double walled corrugated card from fruit & vegetable boxes obtained from my local Aldi, stone effect wallpaper I bought as a PDF, some snow scatter and mounted on Marley floor tile. All very cheap, very easy to construct and very strong.
Stephen Wylde BA (hons)