With the cavalry all sorted I had to turn to the infantry next and I had 120 of them in the Scots Battalia box set, in fact there are actually 126 Infantry in the box set as some are spares and for some reason they don't count them. Obviously I decided not to retain the 40 strong infantry regiments as mine were to be arranged as 20 figure regiments and there were to be 8 of them in total, so I would need around 40 extra figures including a fair few extra command figures. Fortunately I already had a load of extra figures from English battalia boxed sets so the extras that I needed were made up from those as they were essentially the same figures as the Scots. The only thing that I could be short of was the Scots bonnets, but again I had a fair few of these and I also used some helmets for the pikemen as well.
For each 20 figure regiment I need 10 musketeers, 7 pikemen, 1 officer, 1 sergeant and 1 musician, so I needed an extra 8 musketeers, 20 pikemen, 5 musicians and 2 officers to add to the Scots battalia box set to complete my 8 regiment army. All very easily managed from my spare pile of figures and I had loads of extra plastic Scots bonnets too. Incidentally one of the pikemen from each regiment was going to double as a standard bearer which is why I needed 7 pikemen. In the batalia set there was also a frame gun, so I wanted an extra couple of guns and again I looked to my large pile of spares English figures and decided that a couple of light/medium guns and some crew figures fitted with bonnets would serve me well to make up the artillery I wanted. At this stage I also took a suitable looking Sniper figure and added him to the Preacher that I had with the box set and again it was looking good. As mentioned before I had some spare Moss Troopers from the cavalry sets that I could use as generals, but I wanted the Earl of Leven so I bought that from Warlord games for £5.00 and that was the the army essentially finished in terms of all the purchases. Now all that was left to do was start to assemble and paint the figures, more of which next time.
0 Comments
It is fair to say that being a full time figure painter has its ups and downs in terms of my own actual wargaming experience. Although on one hand I have the ability to paint all my own armies I find that this time is greatly reduced due to customer painting commitments. I am envious to say the least when I hand over a beautifully painted army to one of my customers knowing that my own army of that period (if indeed I actually have one like that) is probably still unpainted or half finished. I remember well the feeling I had when handing over one particular 15mm Landsknect army to a customer and actually telling him how envious I was of him for owning such an army. I love the English Civil War period and I am really happy that I have actually convinced my gaming buddies to invest in 28mm English Civil War figures and build up small armies that when brought together we can play large battles with. This has not been an easy task and several of the armies (okay all of them) aren't finished yet and to make matters worse there were quite a few issues issues over basing, organisation and rules that had to be resolved. After months of play testing etc. we were finally able to say that we had got the rules and base sizes sorted which meant that the figures and units could be finished off. Okay, well having set the background for the project I now will get on with the how and where part of actually building up a Scots Covenanter army in 28mm. The obvious place to start was looking at what is out there in 28mm for the period and there are many different manufacturers of wargames figures for this period that I could have gone for, but for several reasons I chose the Warlord Games Scots Covenanters. Best reason of all was cost, they are extremely cheap, next reason was I wanted more of their plastic horses as I just love them, next reason was they are actually really nice figures, and last reason was I really like plastic figures both in terms of the variety you can get from them and the fun of building them up. Okay, with Warlord Games in mind I proceeded to look at the buying options and the army I actually wanted. The army I wanted was as follows: Some Generals, based as vignettes on round bases, maybe 3 or 4 bases in total. 2 regiments each of 10 lance armed cavalry 2 regiments each of 10 pistol armed cavalry 1 regiment of 10 Dragoons both mounted and dismounted versions 8 regiments each of 20 pike & shot infantry Some artillery, maybe 2 or 3 pieces and crews Some characters, maybe a minister and a sniper etc. I must point out at this stage that although I use Pike & Shotte by Warlord Games as my rules preference my English Civil War armies are organised in regiments of both pike & shot combined rather than as separate units of pike & shot as defined in the rules. My cavalry regiments are really squadrons and based in one rank. The Dragoons are always in a 10 man regiment whether on foot or mounted. You may have guessed by now that I do not strictly follow the basing suggestions within the rules, rather I use the Pike & Shotte amendments that I covered in separate posts. So, having identified what I would like to have in my army I decided to buy as much of it as I could in one fell swoop, first stop ebay! My first purchase was 12 Scots lancers from Maelstrom Games for £16.20 and yet another box from another seller for £16.50 both including the postage in the cost, and both saving me almost £6.00 each on the full price from Warlord Games. Next was a Scots Battalia boxed set from Warlord Games as there were none available on ebay and this cost me £60.00 which I picked from from the wargames show in Derby. To these purchases I added 12 dragoons from an earlier ebay purchase that cost me £21.00 including postage, and for a cost £7.70 I had 12 cavalry from an ECW Battalia Starter Army set that I had previously purchased from ebay. Total cost so far was a staggering £121.40, but for this I did get one hell of a lot of figures and I saved £72.10 on the normal price of buying them all separately direct from Warlord Games. This was a good start and I did know that I would have a few bits and pieces still to add to this before I had the exact amount I wanted, but I also knew that I had these already from my vast unfinished amount of unpainted ECW figures in my collection. Okay, I had the figures and now it came to sorting them into their respective units for painting and basing, for this I started with the mounted part of the army including the dragoons. The dragoons were pretty straight forward as there are 12 mounted and 12 dismounted versions to play around with but as I only need 10 of each I put the surplus into my extras box as they could be used for other units or vignette bases. Most would have bonnets but not all of them as I liked the variety of head wear that was included in the Warlord Games box sets and it did make them look all the more irregular in appearance.
Now the figures were absolutely fine but my only concern was with the horses, they too were fine, but they were way too big for a dragoon mount and strangely even in the blurb accompanying the box set they mention the small nags that dragoons would have ridden. So the horses had to go, which was no problem to me at all as I simply exchanged them with smaller horses that I already had from Old Glory and Wargames Foundry ECW cavalry. Both their horses again being fine, but a bit small (a lot smaller than Warlord's horses) for ECW heavy cavalry. So an easy fix really, except that the Old Glory horses don't have saddle cloths so they would be made with green stuff. Now the Cavalry proper, that being the Scots Lancers and normal ECW cavalry that I had bought. Again the horses had to go as again the horses were way too big to be the type of horse or pony that the Scots would have used. Again the answer being to use Old Glory and Foundry horses that I had already and whose riders would be remounted with the plastic horses. Now the thing is about the Warlord Games Scots lancers is that they are essentially the same as the normal ECW cavalry except they have extra metal arms with lances or pistols, some bits of extra equipment and 3 metal riders which are supposed to be the command figures. So in effect you get 15 riders and 12 horses, which is pretty neat really. The metal riders I decided to put to one side as generals etc. and so with 3 boxes of cavalry I had 9 of these in total, easily enough for my command vignettes. There are only 6 lances in each box set, which although there is some debate as to whether or not the Scots lancer regiments were fully equipped with lances I have to say that I like the idea of my lancer regiments being fully equipped. Fortunately I had 3 boxes of lancers which meant 18 lances, enough to equip 2 units of 10 fully leaving the musician with a trumpet. The pistol armed cavalry were no problem at all and had a choice of swords or pistols at random. The headgear would be a choice of helmets, hats and bonnets, with most having a bonnet, some re-sculpting of the hair would be necessary, but this I had already tried out on a similar figure and can be done very easily with a hot needle shaped tool, more of which in another post. I decided my next project for my ECW building collection would be a Gatehouse that I could use as a Tollgate or slot into the walls of a Medieval town or fortified manor. To this end I remembered a German Gatehouse that the great late great modelmaker Ian Weekley had built many years ago for Miniature Wargames I think and wanted something of a similar nature as I liked the way it looked, plus I had already made a version of the model myself a few times over the years.
With this in mind I cut down a Pringles tube and then made and assembled the conical roof as detailed in another post on my blog. I do have a nifty template that I made for the tiles on the conical roof that saves me a lot of time and effort cutting the tiles as I can cut the whole row of tiles to fit around the roof in one go. With this done I turned my attention to the main part of the gatehouse and cut the preformed roof section to the desired length and shaped one end so that it fitted snugly to the round tower.Once that was done I was able to make the building itself from some foamboard making sure that the gable ends fitted well under the roof section. At this stage I had the tower with the roof fixed on and a separate roof and house section that all needed to be finished and fitted together. To this end I painted the roof of the tower and left it to dry out thoroughly while I papered the thatch onto the gatehouse roof followed quickly by the paper stone onto the gatehouse. Finally I returned to the tower and papered the stone onto that but this time I used a different type of stone as I liked the idea that the tower and gatehouse were built at different points in time. With all the components papered and dry I glued the roof onto the gatehouse and then glued to gatehouse to the tower ensuring that they lined up correctly. Next job was the gate itself and I took this off a paper model that I had bought and then I made a template for some arrow slits and printed off some of those to be glued in place where I wanted them. At this point I used an acrylic wash over the conical roof to dull it down a little and then with the same wash I added some damp around the base of the structure and some drips under the arrow slits. Finally once dry I varnished the whole structure with clear acrylic matt varnish which really helps to protect and strengthen my model buildings. Usually I base the buildings I make on hardboard or MDF but on this occasion I left it off the base so that I could decide later how this would link up to the road sections that I intend to make at some later date. But for now it will remain unbased and here is how it looks. |
AuthorStephen Wylde BA (hons) Archives
July 2022
Categories
All
ECW Blogs
ECW Sites
|